Description
Product Description
The latest generation 1.6 turbocharged Renault Clio features a side mounted intercooler from the factory that is both in the wrong location and too small for the standard car, let alone cars that have been ECU tuned. The Renault solution for the Clio Cup cars was to retrofit the entire grid with water spray cooling for the core, but still this was inadequate on the track after a few laps. Given a 15°C day, the typical temperature for the Renault core is over and above 50°C, where our core maintained temperatures between 15 and 20°C cooler.
Due to the location of the standard core and the routing of the air conditioning pipes, going any larger is impossible in the stock location without making major changes. Our solution was a front mounted intercooler that utilises the lower open grille in the bumper, ensuring a good supply of cooled air through the core. The kit we supply comes complete with all the pipework, hoses, clamps, nuts, and bolts required for installation.
⭐ Fantastic high quality product. Installing was relatively easy due to easy-to-follow instructions ⭐
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Intercooler for the Renault Clio RS200/220 1.6 Turbo
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.