We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
This has been designed by Forge Motorsport as a direct replacement for the compressor bypass valve (CBV) that bolts directly to the turbo . It replaces the OEM diaphragm type valve with a piston design that allows for tuning with interchangable springs. For those running higher boost pressures after software tuning this really is a must to ensure that you do not lose boost through the valve.
In The Box:
1 x FMDVRMR Valve
1 x Uprated Yellow Spring
1 x Uprated Blue Spring
3 x M6 x 16 Socket Cap Bolts
1 x Forge Sticker
This product comes assembled with a green spring but is supplied with an additional uprated yellow spring. If your car is a Renault Megane RS250, 265, or 275, then this spring should be fitted instead of the stock green spring. If you wish to further tune this product to fit the needs of your engine, please see the spring tuning kit below.
Replaces OEM Part No. 55558627 (Saab)
If you are unsure if this product is suitable for your application, please contact us.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product ReviewsBe the first to review this product
Want to leave a review?
Login Register FREE!
Recirculation Valve for Renault, Volvo, Hyundai and Kia
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.