Description
Product Description
Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock.
Extended wheel bolts/studs are required, but are not supplied.
These wheel spacers are hubcentric
These CNC machined precision alloy wheel spacers are 20 mm thick with a 4 stud bolt pattern for VW 100 PCD fitments as found on the MK1/MK2 VW Golf.
The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spigot to allow centring on the hub (often called "hubcetric" spacers).
A 20mm spacer will give an overall track increase of 40mm when fitted to both sides of an axle.
These spacers are priced and sold per pair.
Please note: These wheel spacers will not stack or work in combination on the same hub.
Bolt Pattern:4x100
Thread Pitch: 12x1.5
Thickness:20mm
Hub bore:57.1mm
All Forge wheel spacers are manufactured from 6082 alloy
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.