An alloy male to male bayonet style 65mm coupler with inline bayonet nipples.
This coupler replaces the pressed steel hose coupler that is found on the VW / Audi/SEAT/Skoda 130 hp diesel engines ( ARZ engine code). The coupler connects the boost pipework to the intercooler ( see diagrams below ) This replacement eliminates the problem of the OEM couplers blowing apart. This upgrade is advisable to all software upgraded, or tuned engines and higher mileage standard vehicles.
Please note Two couplers are required of different design "M" and "N" These can either be purchased separately or together (FMABHCMN) at a reduced cost.
PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.