Description
Product Description
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
Atmospheric dump valve for the 2015-on Ford Mustang 2.3 Ecoboost
The Forge Motorsport atmospheric dump valve for the 2015-on Ford Mustang 2.3 Ecoboost. The stock Ford valve is now a standard electronic solenoid type which we have seen failures of on other vehicles over the past few years. Our valve solution fully integrates with the ECU so that it still thinks the original valve is connected to the car, yet when it activates the valve, you now get the traditional dump valve ‘whoosh’ accompanying your gearchanges. Also our valve is fully serviceable, and rebuildable with a stronger spring should you increase the boost pressure with a remap.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Atmospheric valve for the Ford Mustang 2.3 EcoBoost
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.