Forge were the first company in the world to launch a replacement Front mounted intercooler for the Audi TT225 back in 2014.
As the tuners started to modify and increase the performance of the 225 engine, Forge continued to improve the intercooler design to allow for better and more efficient cooling.
Three different types of air cores were used in the testing and development of this product. The intercooler was designed on our Solid Works CAD system and flow tested to allow for maximum cooling with minimum pressure loss.
With this extra intercooler capacity, remapping the vehicle would bring further performance gains. The intercooler is a direct fit, and no modification or trimming of the bumper is required.
- Supplied with all fitting hardware, and instructions no additional purchases necessary
- This intercooler is designed as a direct replacement for the OEM intercooler and requires no cutting of bodywork etc.
- This product is designed, developed and manufactured entirely in Great Britain and is covered by our Worldwide lifetime warranty.
- Offering significantly reduced inlet temperatures over the OEM and an increase in power of +7 BHP and 8Nm of torque when fitted to a stock vehicle.
- The Forge Silicon hoses supplied were designed on Solid Works and have been created to include an expensive inner liner of modified silicone known as Flurosilicone.
- This liner means that the hoses are suitable for use with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist.
- The use of a Flurosilicone liner ensures that Forge silicone hoses are the best, longest lasting, and preferred choice of the discerning car enthusiasts.
- Will fit ALL Audi TT225 applications including models with headlight cleaning option
- Tested to 3bar (43.51 psi)
- Intercooler hoses also available here
550mm x 285mm x 50mm
Volume: 7.8 Litres
Frontal Area: 1568cm2
Note: This is not a direct fit to the Quattro 240 version.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Lower Intercooler Silicone Hoses for Audi TT, S3, and SEAT Leon 1.8T
Manufacturer: Forge Motorsport
Silicone Boost Hoses for Audi S3, TT, and SEAT Leon Cupra R1.8T
Manufacturer: Forge Motorsport