Company: Forge Motorsport

Blow Off Valve and Kit for Punto Evo & Renegade 1.4 Multiair

Product code: FMDVF14A
£183.09

Please select product options and quantities below:

Description

Product Description

This is a piston design blow off valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves, but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation, the top or vacuum connection is angled.

 

In The Box:
1 x FMDVF14A Valve
1 x 2000mm of 4mm Vacuum Tube
1 x 500mm of 6mm Vacuum Tube
1 x Solenoid, Bracket, and Screws
14 x Cable Ties
1 x Uprated Blue Spring
1 x Aluminium Machined Coupler
1 x 4mm T Piece
1 x 6mm T Piece
1 x Wiring Harness
1 x 6mm-4mm Plastic Reducer
1 x M6 Nyloc Nut
1 x Instructions
1 x Forge Keyring and Sticker

 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Tags

Alfa Romeo
Fiat
Jeep

Instructions

Warranty

Warranty Information

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please contact our customer service team.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

Shipping

Shipping Information

Shipping Charges & Services

We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.