Description
Product Description
This adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment.
Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.
Compatible with the following BMW MAP sensors:
13627551429
13627585493
13627599042
BMW Compatible Vehicles:
1' F20 (07/2010 — 02/2015)
1' F20 LCI (05/2014 — 06/2016)
1' F21 (07/2010 — 02/2015)
1' F21 LCI (09/2014 — 06/2016)
2' F22 (10/2012 — 06/2016)
2' F87 M2 LCI (10/2016 — 12/2018)
2' F23 (04/2014 — 06/2016)
3' F30 (02/2011 — 01/2016)
3' F30 LCI (10/2014 — 10/2018)
3' F80 M3 (04/2012 — 06/2015)
3' F80 M3 LCI (01/2015 — 10/2018)
3' F31 (07/2011 — 06/2015)
3' F31 LCI (12/2014 — 06/2016)
3' F34 GT (07/2012 — 06/2016)
3' F35 (06/2011 — 08/2015)
3' F35 LCI (01/2015 — 08/2016)
4' F32 (11/2012 — 01/2017)
4' F82 M4 (02/2013 — 02/2017)
4' F82 M4 LCI (05/2016 — 12/2018)
4' F33 (03/2013 — 02/2017)
4' F83 M4 (06/2013 — 02/2017)
4' F83 M4 LCI (05/2016 — 12/2018)
4' F36 Gran Coupé (07/2013 — 12/2016)
5' F07 GT LCI (08/2012 — 02/2017)
5' F10 (06/2010 — 10/2016)
5' F10 LCI (10/2012 — 10/2016)
5' F11 (06/2010 — 06/2013)
5' F11 LCI (10/2012 — 02/2017)
5' F18 (03/2011 — 08/2013)
5' F18 LCI (10/2012 — 04/2017)
5' F90 M5 (01/2016 — 12/2018)
6' F06 Gran Coupé (10/2011 — 02/2015)
6' F06 Gran Coupé LCI (09/2014 — 09/2018)
6' F12 (03/2011 — 02/2015)
6' F12 LCI (05/2014 — 05/2018)
6' F13 (03/2011 — 02/2015)
6' F13 LCI (06/2014 — 10/2017)
X1 E84 (04/2009 — 12/2015)
X3 F25 (02/2011 — 08/2017)
X4 F26 (05/2013 — 03/2018)
X5 F15 (10/2014 — 06/2018)
X5 M F85 (04/2013 — 06/2018)
X6 F16 (11/2014 — 12/2018)
X6 M F86 (10/2013 — 12/2018)
Z4 E89 (01/2011 — 08/2016)
MS BMW Motorsport ( — )
In the Box:
Small Forge Sticker
3.5mm Black Vac Port
Cable ties (x10)
Fixing screws (x2)
4mm Vacuum Hose (x3m)
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Boost Tap for BMW
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.