Description
Product Description
STAGE 1 320hp-380hp +60hp 420Nm-500Nm +80Nm
STAGE2 320hp-430hp +110hp 420Nm-550Nm +130Nm
Having spent a large amount of time developing a range of performance products for the VW EA888.4 high output we now able to offer a custom remap to compliment and extract the full potential of our upgraded hardware. Our fully re-calibrated engine management system, provides significant increases to both power and torque. This customised ECU mapping uses our bespoke software which we has been developed on the road and track to improve real world driving, more power is produced throughout the rev range improving drivability and offering a broader power band to exploit the superb. The extra power gains which can be achieved from the 4 evolution of this VAG 2.0 TSI are very impressive so no matter which state of tune you opt for you will not be disappointed.


Our entry point of tune is our Stage 1 ECU calibration, this is all about delivering a substantial performance gain with or without the addition of our performance hardware. Obviously there are extra gains to be had when combining our performance products such as out turbo inlet adapters FMTIA5 and induction kit FMINDK40, but we can install this software to a completely stock vehicle and achieve the quoted figures.
However if you are really looking to exploit the maximum from the factory Continental turbo Forge Motorsport has also developed it’s Stage 2 ecu calibration. This product will need the following supporting upgrades to be compatible with your vehicle. The upgrades consist of the intake and turbo inlet, intercooler and a high-flow catalyst.
With these products combined with our tailored software will transform the 320bhp 2.0 TSI into a fire breathing hyper hatch! The performance is breath taking, the delivery savage the end result is a 2.0 engine producing a reliable 430 BHP and 550Nm torque!
*If your vehicle has the OE OPF/GPF fitted, Stage 2 is not applicable. Therefore Stage 2 is only legal for markets where GPF is not factory fitted, or is legal to delete, or when car is to be used off-highway for racing purposes on
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Visit our UK Site
Visit our USA Site
Visit our Taiwan Dealer
Visit our Hong Kong Dealer


















