We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
A High Flow vacuum operated twin piston valve for the Audi S3 (8P model). Designed primarily to ensure that high volumes are discharged quickly, this valve can be configured as either a recirculation valve or a blow off valve. Everything required for the installation is supplied along with comprehensive instructions.
We can offer the silicone hose in a choice of Red,Blue or Black, simply select your choice in the options above when ordering.
In The Box:
1 x FMDV8PS3 Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x 1000mm of 4mm Vacuum Tube
2 x 45mm Hose Clamps
2 x 35mm Hose Clamps
1 x 25mm Blanking Plug
1 x 25mm Side Pipe
1 x Straight Silicon Hose (25mm x 65mm)
1 x Silicon Hose #1187
6 x Cable Ties
2 x M5 x 35 Self Tapper Screws
1 x FMBGFK3 (Vacuum Tap, Gasket, and Bolts)
1 x Instructions
1 x Forge Sticker
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
High Flow Blow Off or Recirculation Valve and Kit for Audi S3 (8P)
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.