Description
Product Description
The kit comprises full replacement intake piping made from fully mandrel bent aluminium which is powder coated black. We use only 70mm diameter tubing which will not cause any issues with the MAF sensor readings. The filter is a PiperCross high flow cone filter housed in its own enclosure situated at the front of the vehicle. Everything is connected via high quality silicone couplers and stainless steel hose clamps.
With regard to performance, both rolling road and track testing confirmed that on a standard car the gains were between 3-5hp over the standard air box installation. However, on a software tuned engine, the limitation of the original air box is quickly seen, and gains were in the region of 13-15hp . This was reflected similarly in the torque figures. These gains will be dependent on the performance software installed and of course may be greater dependant on the contamination of the OEM filter.
This product is available with Black hoses only.
*Please note - the Pipercross filter is excluded from the Forge lifetime warranty*
DO NOT OVER TIGHTEN
When fitting the filter to its counterpart please ensure you do not over tighten the hose clamp connecting them. Doing so could result in the part being crushed, leading to fitment and/or performance issues. The recommended torque setting for this hose clamp is 2-2.4Nm
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.