Description
Product Description
Forever at the forefront of performance enhancements for performance vehicles, Forge Motorsport also takes considerable pride is designing products which prevent mechanical failures. Enter FMBH13, a product which has been born from owners with Abarth’s reporting a fault with the original Fiat breather pipework which has a tendency to split.
The original oil breather pipe is manufactured from a metal hard pipe with a rubber hose joiner at each end and It’s these rubber joiners that fail. Over the course years of heat cycles and oil vapour transforming these hoses from a flexible and supple material into a hard almost waxy rubber which cracks over time allowing toxic fumes to enter the cabin and oil to leak over the engine. This is where our development team have inspected this issue and have come up with a totally different design. We now have a product which uses one material and is one part construction, rather than three parts bonded together.



FMBH13 oil breather hose uses a four-ply silicone construction and uses an inner layer of fluorosilicone. This fluorosilicone lining stop’s any oil vapour to sweat through the silicone, this then prevents any compromise to the structure of the hose. The fact it is a full silicone design means it very flexible and will cope with any engine movement. As such the longevity of FMBH13 will far eclipse that of the OE hose, which is why Forge Motorsport can offer a lifetime warranty on all silicone-based products. This product is a direct replacement for the OEM part.



- The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
- The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as fluorosilicone.
- The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically.
- Lifetime warranty

Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Visit our UK Site
Visit our USA Site
Visit our Taiwan Dealer
Visit our Hong Kong Dealer















