Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system.
This oil catch tank system removes aerated oil so that it can be drained and recycled. The kit is suitable for intallation to the 2 litre FSi engines such as in the VW MK5 Golf , MK5 Golf Edition 30 and SEAT Leon Cupra (not for engine codes CCTA CBFA).
Depending on geographic location certain models listed in the compatible vehicles drop down menu are fitted with a charcoal filter to meet local emissions regulations. The filter is located at the front of the engine bay (on the left as you open the bonnet); also see black plastic canister in the engine bay image shown above. This kit with part number FMMK5CT is for models not fitted with the charcoal filter.
If you do have the charcoal filter as standard an alternative catch tank kit is available under the product code FMMK5CTC.
Please contact us by email or phone if you are unsure of which kit is compatible with your model.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product ReviewsBe the first to review this product
Want to leave a review?
Login Register FREE!
Oil Catch Tank System for 2.0 Litre FSi Vehicles Without Charcoal Filter
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.