This intercooler for the Ford Focus ST250 is a real example of British Engineering at its best. Designed with a greater surface area and cooling efficiency than the stock core, this is a real performer. Our core maximises all the space the Ford designers failed to take advantage of, and is combined with an expertly engineered hard pipe kit to maximise the flow rates, and ensure minimum resistance and pressure loss.
We have seen excellent test results. On a typical standard car we saw gains of 18bhp. Temperature drops are in the order of 20°C at the intercooler outlet, compared to the stock core, indicating that the turbo does not have to work as hard, despite the fact the engine now has more power.
Please note: The engine cover cannot be fitted back to stock after installation of this kit
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
Induction Kit for the SEAT Ibiza, Skoda Fabia, and VW Polo 1.2TSI/1.4GT 2015 Onwards