Visit our UK Site
Visit our USA Site
Visit our Taiwan Dealer
Visit our Hong Kong Dealer
Description
Product Description
- Lifetime warranty*
- Washable and reusable design
- Gains of 5 bhp and 6lb/ft torque
- Designed and manufactured in Great Britain
- Improvement in engine power and torque
- Designed to flow stronger for longer
- Fitting is straightforward and can be completed in 20-30 minutes
- No cutting or modification to the vehicle, allowing it to be reversed back to stock
FMINDK39 is the market leading induction kit for the VAG 1.0 TSI. Our induction kit is an evolution of the FMINDK30 used for the VW UP! GTI. There are two key changes from that kit; the main and most important change is the incorporation of the OEM air duct which allows the kit to fit up to the original cold air ducting. The second alteration is the inclusion of a lid to the heat shield which has been selected to retain as much of the cold air flowing into the airbox as possible.
⭐ Great sounding modification and makes your engine bay look 10x better ⭐
After time spent on the dyno, we achieved gains of 5 bhp and 6lbft torque throughout the rev range which is extremely pleasing results not to mention the improved sound track our intake gives this punchy little 1.0 litre engine - higher gains can be expected from mapped cars.
The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of three colours: black, red, or grey. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any car engine bay both technically and aesthetically.
Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge intake.
Please note, if your engine looks like the picture below FMINDK39 and FMDV18 is not compatible.
If your engine looks like the picture below, FMINDK39 and FMDV18 is compatible.
REPLACEMENT AIR FILTERS CAN BE FOUND ON OUR WEBSITE: THE FOAM OPTION IS PART NUMBER: FMAF8, THE PLEATED OPTION IS: FMFILPLE021
-6.jpg)
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
VAG 1.0 TSI Induction Kit
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.
