Description
Product Description
Forge are pleased to present the all new Golf 2.0 L FSIT "Twintercooler." This ground breaking innovation features our unique twin-core design which has added greater efficiency throughout the entire RPM band beyond that of a single core setup. We have achieved this by using the latest core technology with high flow end tank designs to achieve a huge reduction in inlet temperatures.
We have spent many months testing various designs and the Twintercooler design emerging as the clear winner. This is a bolt-on kit that retains the use of the OEM intercooler to produce both horsepower AND torque, but more importantly, a HUGE reduction in inlet temperatures and increased flow efficiency. A reduction in temperatures of up to 20°C from 102 to 82 at 6600 RPM! While the horsepower figures themselves are impressive enough, this will undoubtedly vary from car to car under various circumstances, but such a large reduction in inlet temps. is difficult to achieve. The twintercooler gives an extra 6.1 litres of capacity to your intercooler system along with a further 1016 square centimetres of frontal surface area to help improve your engine inlet air temperatures. The twintercooler has a width of 635mm x height 160mm x depth 60mm and the inlet and outlet tube size is 60mm.
Once again we have a Forge product that truly is Engineered for performance.
Please note: We can now confirm that if your vehicle has been supplied to "Hot Climate specification" and has the extra radiator in the front of the wheel arch our intercooler upgrade WILL fit your car.
- World’s first “Twintercooler “ technology.
- Unique Twin Core design retaining the OEM intercooler.
- 10-15 BHP increase on a stock car.
- Over 15 -20 Degree drop in ambient cooling temperatures
- Includes necessary hardware and instructions for installation.
- Dyno proven horsepower and torque gains
- High flow cast end tanks ensuring optimum air transition for cooling efficiency
- NO CUTTING of the vehicle is required to fit this product
- The unique Forge Silicon hoses supplied in the “Twintercooler “ kit were designed on Solid works and have been created to include an expensive inner liner of modified silicone known as Flurosilicone.
- This liner means that the hoses are suitable for use with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist.
- The use of a Flurosilicone liner ensures that Forge silicone hoses are the best, longest lasting, and preferred choice of the discerning car enthusiasts.
- The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.
- This product has been “designed to last a lifetime “
- Beware of “Forgeries “
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
VW Golf GTi Mk5 Front Mount Twintercooler Kit
Warranty
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.