Our 1.8T Baffled Sump is a truly effective upgrade. An essential item for any race, track or tuned car its makes a sensible investment. It’s certainly cheaper than an engine rebuild! Our baffled sump comes complete with an oil level sensor blanking plate if you do not have a sensor fitted.
The much loved 1.8T engine has proved itself as not only being very capable in producing high power figures, but in being very reliable at the same time. The key to this reliability is the lubrication system, which can quickly become overwhelmed when cars are driven quickly or on track, causing oil starvation. Under extreme acceleration, braking or cornering, the oil can momentarily run out of the sump under centrifugal force, causing a temporary starvation through the oil-ways, putting critical bearings and bores at risk of damage.
For those with bottomless pockets, a ‘dry sump’ system is the ideal preventative solution. But for those in the real world, our neatly engineered solution, based around a brand new OE-spec sump pan is the perfect alternative. Carefully configured baffles and Viton oil control valves ensure that the lubricant can easily move around the engine, but retains a minimum sump capacity, even under the most severe of ‘G’ forces. The relatively soft Viton plates react far quicker than equivalent metal flaps - which are often used on lesser alternatives - and have been designed to withstand the rigours of the high temperatures of oil and its contaminants.
⭐ A very tidy bit of work and perfect fit ⭐
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.