Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product
After looking at the problems associated with the lack of adjustment on the 4 wheel drive vehicles, especially noticeable when the vehicle has been lowered, we decided to look for the best solution. It was about this time that owners were starting to report in Europe that they were experiencing the rear control arms snapping.
Rather than looking at an eccentric bush replacement, we decided to re-engineer the rear control arm to what it should have been in the first place.
We started by adding the means of adjustment, then added strengthening, especially as we appreciate that many of our customers may be using their vehicles on the track. Then we had polyurethane bushes made because they offer far better characteristics. After many months of rigorous testing we are now confident we have the perfect solution.
If you ignore the obvious benefits of reducing uneven tire wear and improving the tire surface contact area, the seat of the pants ride is far better. If you just return the car to the OEM original geometry settings, you find that the tram lining feel disappears and the turn in is far crisper. Of course, if you are willing to experiment with the settings to maximise any other modifications on your car, then this set up is for you. You may be interested to know that the "Le Mans" or "S-lines" that come with the -20mm suspension also benefit from these arms in a big way.
As we continually monitor and evaluate our products we have recently revised the production of these rear tie bars with the addition of a corrosion resistant powder coating process, to ensure the maximum longevity even in the worst environments.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please contact our customer service team.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping Charges & Services
We will contact you after your order is placed to advise of available shipping services and costs and to take payment from you.